Need help   01727 226666
Metpost Driving Block 100x100
Metpost Driving Block 100x100

The driving block is the tool to use to install Metposts. The tool protects Metposts as you hammer it in and also assists with its correct alignment. The 100x100 tool is designed for 100x100 Metposts.

SKU:

f25020055

Company Stock:


Price:

  • £6.32

  • £7.58

    inc VAT


No extended details available.
This resolves the problem of rotted posts which have broken off at ground level but have a solid concrete base. You simply square off the broken post at ground level and tap the repair spur into the remaining wood which is supported by the surrounding concrete base. Suitable for 99mm to 103mm wide posts.
Price ex VAT:

£7.72

44mm Galvanised Panel Clip
Price ex VAT:

£0.83

Green Featheredge
Price ex VAT:

£1.40

Green Featheredge
Price ex VAT:

£1.53

38mm Galvanised Trellis Clip
Price ex VAT:

£0.79

Metpost Driving Block 75x75
Price ex VAT:

£5.25

Used to raise the height of an existing fence without the need to replace the whole fence post. To install drive the extender onto the top of the existing post with a Metpost driving tool. Once in position you can add a new fence post section into the top of the extender to increase the overall height of the fence.  Suitable for 99mm to 103mm wide posts.
Price ex VAT:

£7.39

This resolves the problem of rotted posts which have broken off at ground level but have a solid concrete base. You simply square off the broken post at ground level and tap the repair spur into the remaining wood which is supported by the surrounding concrete base. Suitable for 99mm to 103mm wide posts.
Price ex VAT:

£7.72

Write Your Own Review
There are no product reviews yet.

Follow us


Payments by

Payments by


Accreditations

PEFC

© Copyright 2020 Lawsons (Whetstone) Ltd. All Rights Reserved - VAT No. 726 4860 18 - Registered in England No. 02790259
Registered Office Tyttenhanger Farm, Coursers Road, Colney Health, Hertfordshire, AL4 0PG