GRP Roofing Products

 

Browse Online Products

Sort by
Products
The Cure It GRP Roof Kit includes all of the laminating materials you need for a 12m2 Cure It GRP laminate.
Price inc VAT:

£198.00

Cure It Roofing Resin in 10kg tub is a component part of single-ply GRP laminate system consisting of Roofing Resin and Reinforcement Mat which is applied in situ over a good quality OSB3 deck. The roof is finished with pre-formed GRP edge trims and a coat of pre-pigmented topcoat.
Price inc VAT:

£54.38

Cure It Roofing Resin in 20kg tub is a component part of single-ply GRP laminate system consisting of Roofing Resin and Reinforcement Mat which is applied in situ over a good quality OSB3 deck. The roof is finished with pre-formed GRP edge trims and a coat of pre-pigmented topcoat.
Price inc VAT:

£96.25

Cure It 2inch (50mm) Paint brush for the application of Cure it GRP Resin & Topcoat.
Price inc VAT:

£2.18

Cure It 4inch (100mm) Paint brush for the application of Cure it GRP Resin & Topcoat.
Price inc VAT:

£3.64

Cure It 3inch Paddle roller with a steel frame and lightweight aluminium paddles which aid air removal and reduce slash back.
Price inc VAT:

£5.62

Cure It 9inch Paddle roller with a steel frame and lightweight aluminium paddles which aid air removal and reduce slash back.
Price inc VAT:

£12.53

Cure It 3inch replacement roller sleeve for 3inch roller paddles. Easily cleaned with acetone.
Price inc VAT:

£1.39

Cure It 6inch replacement roller sleeve for 6inch roller paddles. Easily cleaned with acetone.
Price inc VAT:

£2.36

Cure It 3" complete roller for resin and topcoat application and detail work.
Price inc VAT:

£2.36

Cure It 6" complete roller for resin and topcoat application and detail work.
Price inc VAT:

£3.02

The Cure it Accessory Pack includes all of the tools and accessories required for laminating a GRP roof. The rollers and brushes in this pack are designed for use with our resins. Other third party products are likely to be unsuitable for this purpose.
Price inc VAT:

£53.81

Cure It 10L Graduated mixing bucket. Comes complete with an easy to read measuring scale to ensure the perfect mix everytime, mixing both Resin & Topcoat.
The Cure It 75mm wide 65m long detail bandage is used as reinforcements for forming corners and other detail on the roof.
Price inc VAT:

£22.30

Cure It Non slip slate granules used in addition with Topcoat. Used for either decorative purposes or to create a non-slip walk way. 25kg bag
Price inc VAT:

£37.48

Cure It Installer Training pack including installation manual and installation DVD.
Price inc VAT:

£2.45

The Cure It 3m A type trim is a drip trim, fitted to the lowest edge of the roof usually where the rainwater flows into the gutter.
Price inc VAT:

£13.58

The Cure It 3m B type trim is a flat roof edge detail to prevent water run off.
Price inc VAT:

£15.78

The Cure It 3m D type trim is an asymmetric fillet trim for use against abutting walls. It will also provide expansion and perimeter ventilation.
Price inc VAT:

£13.72

The Cure It 3m F type trim is a flat section for use as continuous flashing under slates at a roof junction. It can also be used as a gutter lining. 20m roll
Cure It hot press moulded GRP pre-formed external corner For use with A200 and B260 profiles to form a left or right hand corner.
Price inc VAT:

£11.26

Cure It external corner fillet trim used as a pre-formed corner for the D260 fillet profile. Avoids mitring in situ.
Price inc VAT:

£12.28

Cure It internal corner fillet trim used as pre-formed internal corner for D260 fillet trim. Avoids mitring in situ.
Price inc VAT:

£12.28

Showing 1 - 41 of 41 Results