Hansil Contractor Hand Expanding Foam

• Filling gaps & voids
• Expands to fill all surface irregularities
• Easily cut, sawn, sanded, painted or plastered over
• Typical applications include gaps around door & window frames, pipe entries through brickwork & walls, insulating water pipes & tanks, & gaps around floor boards & skirting boards

Directions of use

• Ensure gaps to be filled are free from dust, dirt and loose particles.
• Surfaces to be sealed should be moistened prior to application (a water mister is ideal for this purpose).
• Wear gloves and protective eyewear during use.
• Shake the can vigorously to mix the contents.
• Screw the applicator nozzle onto the valve.
• Holding the can in the upside down position, press the trigger on the applicator nozzle to extrude foam. Only fill the cavity, as the foam will expand further after application.
• The foam will be cured in 2 hours, excess foam can be cut away if required.
• After application, remove the nozzle and clean
• If used externally, this product should be protected from U.V light. This can be achieved by painting, sealing or plastering over the cured material.