24/7 Support  01727 226666
Metpost Driving Block 75x75
Metpost Driving Block 75x75

The driving block is the tool to use to install Metposts. The tool protects Metposts as you hammer it in and also assists with its correct alignment. The 75x75 tool is designed for 75x75 Metposts.

SKU:

f25020050


Price:

  • £6.79

  • £8.15

    inc VAT


No extended details available.
This resolves the problem of rotted posts which have broken off at ground level but have a solid concrete base. You simply square off the broken post at ground level and tap the repair spur into the remaining wood which is supported by the surrounding concrete base. Suitable for 73mm to 78mm wide posts.
Price ex VAT:

£10.09

Metpost 75x75x600 Spike System 2
44mm Galvanised Panel Clip
Price ex VAT:

£0.95

Green Featheredge Board
Price ex VAT:

£1.21

38mm Galvanised Trellis Clip
Price ex VAT:

£0.89

Metpost 75x75x600 Spike System 2
Metpost Driving Block 100x100
Price ex VAT:

£10.19

Used to raise the height of an existing fence without the need to replace the whole fence post. To install drive the extender onto the top of the existing post with a Metpost driving tool. Once in position you can add a new fence post section into the top of the extender to increase the overall height of the fence.  Suitable for 73mm to 78mm wide posts.
Price ex VAT:

£8.40

This resolves the problem of rotted posts which have broken off at ground level but have a solid concrete base. You simply square off the broken post at ground level and tap the repair spur into the remaining wood which is supported by the surrounding concrete base. Suitable for 73mm to 78mm wide posts.
Price ex VAT:

£10.09

Metpost 75x75x600 Spike System 2
Write Your Own Review
There are no product reviews yet.